LEARN MORE

Ventrac Contract Services

The Ventrac is a versatile tractor unit with 18 different attachments which are able to enhance the overall management of your property. DJUKE have invested in this equipment plus multiple attachments which mean we are able to offer services which will assist our clients to maximise the potential of their properties year round, in every season of the year. 

Power Rake

The KP540 Power Rake is designed for leveling rough ground and new facility installations, as well as removing surface rocks and debris. Its compact design allows the operator to work in tight quarters including around corners and edges. Ideal for leveling potholes on loose surfaces paths and tracks. Seventy-two replaceable carbide tips pulverize and refine the soil. Materials can be moved forward or to either side by hydraulically angling the drum left or right. The drum can also be reversed to allow back-dragging of soils. A rotating handle adjusts the height by up to 3 inches in ⅛ increments. Adjustable side wings can be lowered on both sides for routing material.

Power Broom

The HB580 Power Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. A corner-less frame design permits sweeping against curbs and allows for the cleaning of corners.The HB580 Broom can be hydraulically angled left or right and lifted up or down all with the S.D.L.A. Controls. An optional electric actuator allows the operator to adjust the speed and direction of the broom rotation, maximizing effectiveness and allowing the operator to reverse broom rotation, all from the seat of the tractor.

Tough Cut

The HQ680 Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. A large baffled front opening helps direct materials into the deck and helps hinder debris from escaping. Three heavy-duty blades counter rotate to cut and deposit waste evenly without windrowing. Capable of tackling saplings and large thorn bushes, the Tough Cut makes short work out of overgrown thickets. The Tough Cut can be adjusted to three cutting heights: 3, 3 5/8, and 4¼ inches. Easy servicing of belts and pulleys is provided by the hinged and removable cover. The tilt-up deck provides easy access to the blades.

AERA-VATOR

When turf compaction caused by foot or vehicle traffic, sporting events or other stresses is a problem, periodic aeration is necessary to keep the turf healthy.The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Eight holes are created each foot (86 holes per square meter) and hole size is regulated by drive speed-- the slower the drive speed, the larger the hole. The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil.

Slope Mowing

While slopes and hillsides add aesthetics and dimension to the landscape, those same hills and slopes can be very dangerous to mow without the right type of slope mowing equipment. Ventrac tractors offer a unique combination of benefits that no other piece of equipment can offer. Discover how Ventrac is a safer solution to your slope mowing needs for slopes up to 30 degrees (58% grade).

Stump Grinding

The KC180 Stump Grinder makes quick work of unwanted stumps and roots. Heavy-duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in work area.The Stump Grinder, mounted on the 4000 Series tractor, creates an agile, powerful and "turf friendly" mobile unit for lawns, golf courses, parks, and municipalities. A special convex mirror mounted to the tractor provides operator visibility to the front cutting edge. Steering wheel-controlled articulation provides side-to-side cutting action. Forward and reverse motion is controlled with the tractor's hydrostatic drive.

Trenching

The KY400 Trencher is capable of trenching up to 40 inches (102 cm) in depth with a 5½ inch (14 cm) wide cut. It is designed with dual Push-N-Pull cylinders to assure positive boom control for digging, boom lift, and transport. The terminator/cup combo chain offers carbide cutting tips for excellent cutting performance in a variety soil conditions. Digging teeth bolt onto the chain for easy replacement. The KY400 attached to a VENTRAC 4000 Series tractor gives the operator the ability to maneuver into hard-to-reach locations without damaging the turf like a traditional track unit would.

What our customers are saying

Day two with cammymac23 Ventrac Services, still can't believe what an unbelieveable job these guys do!

Bramshaw Golf Club Greenkeeepers @bramshawGreens


There are times in this industry when some new machines impress you but sometimes you find a game changer! cammymac23 and Andy transfomed our pathways today saving days of work for the team. 

Matt Plested - Stoneham Golf Club